Products

Featured

  • Factory Cheap Hot Reflecting Mirror - WINDOW – WISOPTIC

    Factory Cheap Hot Reflecting Mirror - WINDOW – WISOPTIC

    Optical windows are made by optically flat, transparent optical material that allow light into an instrument. Windows have high optical transmission with little distortion of the transmitted signal, but can not change the magnification of the system. Windows are widely used in various optical devices such as spectroscopic equipment, optoelectronics, microwave technology, diffractive optics, etc. When choosing a window, the user should consider whether the material’s transmission propert...
  • One of Hottest for Co:Spinel - KTP Crystal – WISOPTIC

    One of Hottest for Co:Spinel - KTP Crystal – WISOPTIC

    KTP (KTiOPO4 ) is one of the most commonly used nonlinear optical materials. For example, it’s regularly used for frequency doubling of Nd:YAG lasers and other Nd-doped lasers, particularly at low or medium-power density. KTP is also widely used as OPO, EOM, optical wave-guide material, and in directional couplers. KTP exhibits a high optical quality, broad transparency range, wide acceptance angle, small walk-off angle, and type I and II non-critical phase-matching (NCPM) in a wide wavelengt...
  • OEM Factory for Yb:Yag - Nd:YAG Crystal – WISOPTIC

    OEM Factory for Yb:Yag - Nd:YAG Crystal – WISOPTIC

    Nd:YAG (Neodimium Doped Yttrium Aluminum Garnet) has been and continue to be the most widely used laser crystal for solid-state lasers. Good fluorescence lifetime (twice more than that of Nd:YVO4) and thermal conductivity, as well as robust nature, make Nd:YAG crystal very suitable for high-power continuous wave, high-energy Q-switched and single mode operations. WISOPTIC provides Nd:YAG rods with the following features: different doping levels, high optical homogeneity, high processing accur...
  • Hot-selling Kh2po4 - Bonded Crystal – WISOPTIC

    Hot-selling Kh2po4 - Bonded Crystal – WISOPTIC

    Diffusion bonded crystal consists of two, three or more parts of crystals with different dopants or same dopant with different doping levels. This material is commonly made by bonding one laser crystal with one or two undoped crystals by precise optical contact and further processing under high temperature. This innovative design substantially reduces thermal lens effect of the laser crystals, thus make it possible fora compact laser to have enough power. Contact us for the best solution for ...
  • Special Price for Bbo Crystal - LBO Crystal – WISOPTIC
  • 2020 wholesale price Kd*P Pockels Cell - BBO POCKELS CELL – WISOPTIC

    2020 wholesale price Kd*P Pockels Cell - BBO POCKELS CELL – WISOPTIC

    BBO(Beta-Barium Borate, β-BaB2O4)based Pockels cells operate from approximately 0.2 – 1.65 µm and are not subject to tracking degradation. BBO exhibits low piezoelectric response, good thermal stability, and low absorption. Due to the low piezoelectric coupling coefficients of BBO, BBO Pockels cells function at repetition rates of hundreds of kilohertz. These Pockels cells work in regenerative amplifiers, high pulse repetition rate micro-machining lasers and high-average power lasers ...
  • China wholesale Integrated Q-Switch - BBO POCKELS CELL – WISOPTIC

    China wholesale Integrated Q-Switch - BBO POCKELS CELL – WISOPTIC

    BBO(Beta-Barium Borate, β-BaB2O4)based Pockels cells operate from approximately 0.2 – 1.65 µm and are not subject to tracking degradation. BBO exhibits low piezoelectric response, good thermal stability, and low absorption. Due to the low piezoelectric coupling coefficients of BBO, BBO Pockels cells function at repetition rates of hundreds of kilohertz. These Pockels cells work in regenerative amplifiers, high pulse repetition rate micro-machining lasers and high-average power lasers ...
  • Manufacturing Companies for Ceramic Reflector - THIN FILM POLARIZER – WISOPTIC

    Manufacturing Companies for Ceramic Reflector - THIN FILM POLARIZER – WISOPTIC

    Thin film polarizers are made from composed materials which include a polarizing film, an inner protective film, a pressure-sensitive adhesive layer, and an outer protective film. Polarizer is used to change un-polarized beam into linear polarized beam. When the light passes through the polarizer, one of the orthogonal polarization components is strongly absorbed by the polarizer and the other component is weakly absorbed, thus natural light is converted into linearly polarized light. Polariz...
  • Factory Outlets Co:Mlao - Nd:YVO4 Crystal – WISOPTIC

    Factory Outlets Co:Mlao - Nd:YVO4 Crystal – WISOPTIC

    Nd:YVO4 (Neodymium-doped Yttrium Vanadate) is one of the best commercially available material for diode-pumped solid-state lasers, especially for lasers with low or middle power density. For example, Nd:YVO4 is a better choice than Nd:YAG for generating low-power beams in hand-held pointers or other compact lasers. In these applications, Nd:YOV4 has some advantages over Nd:YAG, e.g. high absorption of pumped laser irradiation and large stimulated emission cross section. Nd:YVO4 is a good choi...
  • Wholesale Price China Bbo - LBO Crystal – WISOPTIC
  • Low price for Plano-Convex Lens - WAVE PLATE – WISOPTIC

    Low price for Plano-Convex Lens - WAVE PLATE – WISOPTIC

    A wave plate, also called a phase retarder, is an optical device that changes the polarization state of light by generating an optical path difference (or phase difference) between two mutually orthogonal polarization components. When the incident light passes through wave plates with different types of parameter, the exit light is different, which may be linearly polarized light, elliptically polarized light, circularly polarized light, etc. At any particular wavelength, the phase difference...
  • Best Price for Baf2 - KDP & DKDP Crystal  – WISOPTIC

    Best Price for Baf2 - KDP & DKDP Crystal – WISOPTIC

    KDP (KH2PO4 ) and DKDP/KD*P (KD2PO4 ) are among the most widely-used commercial NLO materials. With good UV transmission, high damage threshold, and high birefringence, these material are usually used for doubling, tripling and quadrupling of Nd:YAG laser. With high E-O coefficient, KDP and DKDP crystals are also widely used to make Pockels cells for laser system, such as Nd:YAG, Nd:YLF, Ti-Sapphire, Alexandrite, etc. Even though DKDP with high deuteration is more commonly used, KDP and DKDP ...
123456 Next > >> Page 1 / 94