-
OEM Customized Yb:Caf2 - Bonded Crystal – WISOPTIC
Diffusion bonded crystal consists of two, three or more parts of crystals with different dopants or same dopant with different doping levels. This material is commonly made by bonding one laser crystal with one or two undoped crystals by precise optical contact and further processing under high temperature. This innovative design substantially reduces thermal lens effect of the laser crystals, thus make it possible fora compact laser to have enough power. Contact us for the best solution for ... -
Excellent quality Yvo4 Bonded - KTA Crystal – WISOPTIC
KTA (Potassium Titanyle Arsenate, KTiOAsO4 ) is a nonlinear optical crystal similar to KTP in which atom P is replaced by As. It has good non-linear optical and electro-optical properties, e.g. significantly reduced absorption in band range of 2.0-5.0 µm, broad angular and temperature bandwidth, low dielectric constants. Compared with KTP, the main advantages of KTA include: higher second-order nonlinear coefficient, longer IR cut-off wavelength, and less absorption at 3.5 µm. KTA also has lo... -
Factory wholesale Bibo - BBO Crystal – WISOPTIC
α-BBO is a negative uniaxial crystal with large birefringence and broad transparent range from UV (190 nm) to mid-infrared (3500 nm). α-BBO grown by WISOPTIC has very good internal quality, less absorption, high extinction ratio and high UV transmission. α-BBO is widely used in deep UV and high power laser systems as devices of Gran prisms, polarizing beam splitters, compensator and so on. ẞ-BBO is an excellent nonlinear crystal with combination of a number of unique features: wide transparen... -
High definition Kdp - KTP / GTR-KTP Crystal – WISOPTIC
KTP (KTiOPO4 ) is one of the most commonly used nonlinear optical materials. For example, it’s regularly used for frequency doubling of Nd:YAG lasers and other Nd-doped lasers, particularly at low or medium-power density. KTP is also widely used as OPO, EOM, optical wave-guide material, and in directional couplers. KTP exhibits a high optical quality, broad transparency range, wide acceptance angle, small walk-off angle, and type I and II non-critical phase-matching (NCPM) in a wide wavelengt... -
One of Hottest for Co:Spinel - KTA Crystal – WISOPTIC
KTA (Potassium Titanyle Arsenate, KTiOAsO4 ) is a nonlinear optical crystal similar to KTP in which atom P is replaced by As. It has good non-linear optical and electro-optical properties, e.g. significantly reduced absorption in band range of 2.0-5.0 µm, broad angular and temperature bandwidth, low dielectric constants. Compared with KTP, the main advantages of KTA include: higher second-order nonlinear coefficient, longer IR cut-off wavelength, and less absorption at 3.5 µm. KTA also has lo... -
Professional Design Q-Switch Crystals - Nd:YVO4 Crystal – WISOPTIC
Nd:YVO4 (Neodymium-doped Yttrium Vanadate) is one of the best commercially available material for diode-pumped solid-state lasers, especially for lasers with low or middle power density. For example, Nd:YVO4 is a better choice than Nd:YAG for generating low-power beams in hand-held pointers or other compact lasers. In these applications, Nd:YOV4 has some advantages over Nd:YAG, e.g. high absorption of pumped laser irradiation and large stimulated emission cross section. Nd:YVO4 is a good choi... -
China Factory for Ktp Crystal - Nd:YVO4 Crystal – WISOPTIC
Nd:YVO4 (Neodymium-doped Yttrium Vanadate) is one of the best commercially available material for diode-pumped solid-state lasers, especially for lasers with low or middle power density. For example, Nd:YVO4 is a better choice than Nd:YAG for generating low-power beams in hand-held pointers or other compact lasers. In these applications, Nd:YOV4 has some advantages over Nd:YAG, e.g. high absorption of pumped laser irradiation and large stimulated emission cross section. Nd:YVO4 is a good choi... -
Professional Design Q-Switch Crystals - LiNbO3 / PPLN Crystal – WISOPTIC
LiNbO3 (Lithium Niobate) crystal is a multifunctional material that integrates properties of piezoelectric, ferroelectric, pyroelectric, nonlinear, electro-optical, photoelastic, etc. LiNbO3 has good thermal stability and chemical stability. As one of the most thoroughly characterized nonlinear optical materials, LiNbO3 is suitable for a variety of frequency conversion applications. For example, it is widely used as frequency doublers for wavelength >1 μm and optical parametric oscillators... -
Best-Selling Frequency Doubling Of Nd:Yag Lasers - Bonded Crystal – WISOPTIC
Diffusion bonded crystal consists of two, three or more parts of crystals with different dopants or same dopant with different doping levels. This material is commonly made by bonding one laser crystal with one or two undoped crystals by precise optical contact and further processing under high temperature. This innovative design substantially reduces thermal lens effect of the laser crystals, thus make it possible fora compact laser to have enough power. Contact us for the best solution for ... -
Hot-selling Rod Lens - PBS (Polarizing Beam Splitter) – WISOPTIC
WISOPTIC Specifications – PBS* Material N-BK7（H-K9L), H-ZF3, fused quartz Diameters / Tolerance 0.5×0.5×0.5mm~50×50×50mm / ±0.2 mm Extinction Ratio Single band: >1000:1 Broad band: >300:1 Clear Aperture > 90% of central area Surface Quality < 40/20 [S/D] Flatness < λ/10 @ 632.8 nm Parallelism ≤ 10” Transmitted Light Deviation ＜±3 arcmin Reflected Light Deviation 90°±3 arcmin Transmission Ratio Tp>95%，Ts<1% Reflection Ratio Rs>99... -
Good Quality Pockels Cells - LN POCKELS CELL – WISOPTIC
The electro-optic Q-switch can be used to adjust the loss in the laser cavity to generate high-intensity pulsed laser. When an electromagnetic field acts on a photoelectrically active crystal, such as lithium niobate crystal (LN), the change in refractive index is proportional to the electric field, the so-called Pockels effect. Light passing through the active crystal undergoes a phase change proportional to the length of the interaction, thereby changing its polarization. By placing the cry... -
OEM China Ylf - KTP / GTR-KTP Crystal – WISOPTIC
KTP (KTiOPO4 ) is one of the most commonly used nonlinear optical materials. For example, it’s regularly used for frequency doubling of Nd:YAG lasers and other Nd-doped lasers, particularly at low or medium-power density. KTP is also widely used as OPO, EOM, optical wave-guide material, and in directional couplers. KTP exhibits a high optical quality, broad transparency range, wide acceptance angle, small walk-off angle, and type I and II non-critical phase-matching (NCPM) in a wide wavelengt...
