Products

Featured

  • Fast delivery 650nm Dye Laser - DKDP POCKELS CELL – WISOPTIC

    Fast delivery 650nm Dye Laser - DKDP POCKELS CELL – WISOPTIC

    Because DKDP crystals are prone to deliquescent and have poor mechanical properties, DKDP Pockels cell with excellent performance have extremely high requirements for the selection of DKDP material, crystal processing quality and switch assembling technique. The high performance DKDP Pockels cell developed by WISOPTIC have been widely used in high-en cosmetic and medical lasers produced by some distinguished companies in China, Korea, Europe and USA. WISOPTIC has been granted of several paten...
  • Low MOQ for High Nonlinear Coefficients - BBO Crystal – WISOPTIC

    Low MOQ for High Nonlinear Coefficients - BBO Crystal – WISOPTIC

    α-BBO is a negative uniaxial crystal with large birefringence and broad transparent range from UV (190 nm) to mid-infrared (3500 nm). α-BBO grown by WISOPTIC has very good internal quality, less absorption, high extinction ratio and high UV transmission. α-BBO is widely used in deep UV and high power laser systems as devices of Gran prisms, polarizing beam splitters, compensator and so on. ẞ-BBO is an excellent nonlinear crystal with combination of a number of unique features: wide transparen...
  • Manufacturer for Rtp Pockels Cell - BBO POCKELS CELL – WISOPTIC

    Manufacturer for Rtp Pockels Cell - BBO POCKELS CELL – WISOPTIC

    BBO(Beta-Barium Borate, β-BaB2O4)based Pockels cells operate from approximately 0.2 – 1.65 µm and are not subject to tracking degradation. BBO exhibits low piezoelectric response, good thermal stability, and low absorption. Due to the low piezoelectric coupling coefficients of BBO, BBO Pockels cells function at repetition rates of hundreds of kilohertz. These Pockels cells work in regenerative amplifiers, high pulse repetition rate micro-machining lasers and high-average power lasers ...
  • Personlized Products Optical Parametric Amplification - Bonded Crystal – WISOPTIC

    Personlized Products Optical Parametric Amplification - Bonded Crystal – WISOPTIC

    Diffusion bonded crystal consists of two, three or more parts of crystals with different dopants or same dopant with different doping levels. This material is commonly made by bonding one laser crystal with one or two undoped crystals by precise optical contact and further processing under high temperature. This innovative design substantially reduces thermal lens effect of the laser crystals, thus make it possible fora compact laser to have enough power. Contact us for the best solution for ...
  • New Arrival China ẞ-Bab2o4 - LiNbO3 / PPLN Crystal – WISOPTIC

    New Arrival China ẞ-Bab2o4 - LiNbO3 / PPLN Crystal – WISOPTIC

    LiNbO3 (Lithium Niobate) crystal is a multifunctional material that integrates properties of piezoelectric, ferroelectric, pyroelectric, nonlinear, electro-optical, photoelastic, etc. LiNbO3 has good thermal stability and chemical stability. As one of the most thoroughly characterized nonlinear optical materials, LiNbO3 is suitable for a variety of frequency conversion applications. For example, it is widely used as frequency doublers for wavelength >1 μm and optical parametric oscillators...
  • Excellent quality Lens - CERAMIC REFLECTOR – WISOPTIC

    Excellent quality Lens - CERAMIC REFLECTOR – WISOPTIC

    The ceramic reflector (ceramic cavity) is made from 99% Al2O3, and the body is fired at suitable temperature to retain appropriate porosity and high strength. The surface of the reflector is fully coated with high-reflectivity ceramic glaze. Compared with the gold-plated reflector, ceramic reflector has main advantages of extremely long service life and high diffuse reflectivity.  WISOPTIC Specifications – Ceramic Reflector Material Al2O3 (99%)+ Ceramic glaze Color White Density ...
  • Hot-selling Aesthetic Laser Components - RTP POCKELS CELL – WISOPTIC
  • China Factory for Ktp Crystal - KTA Crystal – WISOPTIC

    China Factory for Ktp Crystal - KTA Crystal – WISOPTIC

    KTA (Potassium Titanyle Arsenate, KTiOAsO4 ) is a nonlinear optical crystal similar to KTP in which atom P is replaced by As. It has good non-linear optical and electro-optical properties, e.g. significantly reduced absorption in band range of 2.0-5.0 µm, broad angular and temperature bandwidth, low dielectric constants. Compared with KTP, the main advantages of KTA include: higher second-order nonlinear coefficient, longer IR cut-off wavelength, and less absorption at 3.5 µm. KTA also has lo...
  • OEM Manufacturer Waveplates - CERAMIC REFLECTOR – WISOPTIC

    OEM Manufacturer Waveplates - CERAMIC REFLECTOR – WISOPTIC

    The ceramic reflector (ceramic cavity) is made from 99% Al2O3, and the body is fired at suitable temperature to retain appropriate porosity and high strength. The surface of the reflector is fully coated with high-reflectivity ceramic glaze. Compared with the gold-plated reflector, ceramic reflector has main advantages of extremely long service life and high diffuse reflectivity.  WISOPTIC Specifications – Ceramic Reflector Material Al2O3 (99%)+ Ceramic glaze Color White Density ...
  • Wholesale Price China Bbo - Bonded Crystal – WISOPTIC

    Wholesale Price China Bbo - Bonded Crystal – WISOPTIC

    Diffusion bonded crystal consists of two, three or more parts of crystals with different dopants or same dopant with different doping levels. This material is commonly made by bonding one laser crystal with one or two undoped crystals by precise optical contact and further processing under high temperature. This innovative design substantially reduces thermal lens effect of the laser crystals, thus make it possible fora compact laser to have enough power. Contact us for the best solution for ...
  • PriceList for Spherical Mirror - Polarizing Beam Splitter – WISOPTIC

    PriceList for Spherical Mirror - Polarizing Beam Splitter – WISOPTIC

      WISOPTIC Specifications – PBS* Material N-BK7(H-K9L), H-ZF3, fused quartz Diameters / Tolerance 0.5×0.5×0.5mm~50×50×50mm / ±0.2 mm Extinction Ratio Single band: >1000:1 Broad band: >300:1 Clear Aperture > 90% of central area Surface Quality < 40/20 [S/D] Flatness < λ/10 @ 632.8 nm  Parallelism ≤ 10” Transmitted Light Deviation <±3 arcmin Reflected Light Deviation 90°±3 arcmin Transmission Ratio Tp>95%,Ts<1% Reflection Ratio Rs>99...
  • OEM/ODM Factory Yag Rods - KTP / GTR-KTP Crystal – WISOPTIC

    OEM/ODM Factory Yag Rods - KTP / GTR-KTP Crystal – WISOPTIC

    KTP (KTiOPO4 ) is one of the most commonly used nonlinear optical materials. For example, it’s regularly used for frequency doubling of Nd:YAG lasers and other Nd-doped lasers, particularly at low or medium-power density. KTP is also widely used as OPO, EOM, optical wave-guide material, and in directional couplers. KTP exhibits a high optical quality, broad transparency range, wide acceptance angle, small walk-off angle, and type I and II non-critical phase-matching (NCPM) in a wide wavelengt...