Products

Featured

  • Fast delivery Achromatic Lens - THIN FILM POLARIZER – WISOPTIC

    Fast delivery Achromatic Lens - THIN FILM POLARIZER – WISOPTIC

    Thin film polarizers are made from composed materials which include a polarizing film, an inner protective film, a pressure-sensitive adhesive layer, and an outer protective film. Polarizer is used to change un-polarized beam into linear polarized beam. When the light passes through the polarizer, one of the orthogonal polarization components is strongly absorbed by the polarizer and the other component is weakly absorbed, thus natural light is converted into linearly polarized light. Polariz...
  • Best-Selling Frequency Doubling Of Nd:Yag Lasers - Nd:YAG Crystal – WISOPTIC

    Best-Selling Frequency Doubling Of Nd:Yag Lasers - Nd:YAG Crystal – WISOPTIC

    Nd:YAG (Neodimium Doped Yttrium Aluminum Garnet) has been and continue to be the most widely used laser crystal for solid-state lasers. Good fluorescence lifetime (twice more than that of Nd:YVO4) and thermal conductivity, as well as robust nature, make Nd:YAG crystal very suitable for high-power continuous wave, high-energy Q-switched and single mode operations. WISOPTIC provides Nd:YAG rods with the following features: different doping levels, high optical homogeneity, high processing accur...
  • Free sample for Fused Silica - Bonded Crystal – WISOPTIC

    Free sample for Fused Silica - Bonded Crystal – WISOPTIC

    Diffusion bonded crystal consists of two, three or more parts of crystals with different dopants or same dopant with different doping levels. This material is commonly made by bonding one laser crystal with one or two undoped crystals by precise optical contact and further processing under high temperature. This innovative design substantially reduces thermal lens effect of the laser crystals, thus make it possible fora compact laser to have enough power. Contact us for the best solution for ...
  • Manufacturing Companies for Ceramic Reflector - Polarizing Beam Splitter – WISOPTIC

    Manufacturing Companies for Ceramic Reflector - Polarizing Beam Splitter – WISOPTIC

      WISOPTIC Specifications – PBS* Material N-BK7(H-K9L), H-ZF3, fused quartz Diameters / Tolerance 0.5×0.5×0.5mm~50×50×50mm / ±0.2 mm Extinction Ratio Single band: >1000:1 Broad band: >300:1 Clear Aperture > 90% of central area Surface Quality < 40/20 [S/D] Flatness < λ/10 @ 632.8 nm  Parallelism ≤ 10” Transmitted Light Deviation <±3 arcmin Reflected Light Deviation 90°±3 arcmin Transmission Ratio Tp>95%,Ts<1% Reflection Ratio Rs>99...
  • Hot-selling Aesthetic Laser Components - DKDP POCKELS CELL – WISOPTIC

    Hot-selling Aesthetic Laser Components - DKDP POCKELS CELL – WISOPTIC

    Because DKDP crystals are prone to deliquescent and have poor mechanical properties, DKDP Pockels cell with excellent performance have extremely high requirements for the selection of DKDP material, crystal processing quality and switch assembling technique. The high performance DKDP Pockels cell developed by WISOPTIC have been widely used in high-en cosmetic and medical lasers produced by some distinguished companies in China, Korea, Europe and USA. WISOPTIC has been granted of several paten...
  • Cheap price Eom - RTP POCKELS CELL – WISOPTIC
  • Factory Price For Cobalt Doped Spinel - Nd:YVO4 Crystal – WISOPTIC

    Factory Price For Cobalt Doped Spinel - Nd:YVO4 Crystal – WISOPTIC

    Nd:YVO4 (Neodymium-doped Yttrium Vanadate) is one of the best commercially available material for diode-pumped solid-state lasers, especially for lasers with low or middle power density. For example, Nd:YVO4 is a better choice than Nd:YAG for generating low-power beams in hand-held pointers or other compact lasers. In these applications, Nd:YOV4 has some advantages over Nd:YAG, e.g. high absorption of pumped laser irradiation and large stimulated emission cross section. Nd:YVO4 is a good choi...
  • Top Suppliers Polarization Beam Splitter - CERAMIC REFLECTOR – WISOPTIC

    Top Suppliers Polarization Beam Splitter - CERAMIC REFLECTOR – WISOPTIC

    The ceramic reflector (ceramic cavity) is made from 99% Al2O3, and the body is fired at suitable temperature to retain appropriate porosity and high strength. The surface of the reflector is fully coated with high-reflectivity ceramic glaze. Compared with the gold-plated reflector, ceramic reflector has main advantages of extremely long service life and high diffuse reflectivity.  WISOPTIC Specifications – Ceramic Reflector Material Al2O3 (99%)+ Ceramic glaze Color White Density ...
  • Short Lead Time for 1064nm Laser Crystals - BBO Crystal – WISOPTIC

    Short Lead Time for 1064nm Laser Crystals - BBO Crystal – WISOPTIC

    α-BBO is a negative uniaxial crystal with large birefringence and broad transparent range from UV (190 nm) to mid-infrared (3500 nm). α-BBO grown by WISOPTIC has very good internal quality, less absorption, high extinction ratio and high UV transmission. α-BBO is widely used in deep UV and high power laser systems as devices of Gran prisms, polarizing beam splitters, compensator and so on. ẞ-BBO is an excellent nonlinear crystal with combination of a number of unique features: wide transparen...
  • Chinese Professional Mirrors - WINDOW – WISOPTIC

    Chinese Professional Mirrors - WINDOW – WISOPTIC

    Optical windows are made by optically flat, transparent optical material that allow light into an instrument. Windows have high optical transmission with little distortion of the transmitted signal, but can not change the magnification of the system. Windows are widely used in various optical devices such as spectroscopic equipment, optoelectronics, microwave technology, diffractive optics, etc. When choosing a window, the user should consider whether the material’s transmission propert...
  • Professional Design Q-Switch Crystals - KDP & DKDP Crystal  – WISOPTIC

    Professional Design Q-Switch Crystals - KDP & DKDP Crystal – WISOPTIC

    KDP (KH2PO4 ) and DKDP/KD*P (KD2PO4 ) are among the most widely-used commercial NLO materials. With good UV transmission, high damage threshold, and high birefringence, these material are usually used for doubling, tripling and quadrupling of Nd:YAG laser. With high E-O coefficient, KDP and DKDP crystals are also widely used to make Pockels cells for laser system, such as Nd:YAG, Nd:YLF, Ti-Sapphire, Alexandrite, etc. Even though DKDP with high deuteration is more commonly used, KDP and DKDP ...
  • China Manufacturer for Crystals For Opo - BBO Crystal – WISOPTIC

    China Manufacturer for Crystals For Opo - BBO Crystal – WISOPTIC

    α-BBO is a negative uniaxial crystal with large birefringence and broad transparent range from UV (190 nm) to mid-infrared (3500 nm). α-BBO grown by WISOPTIC has very good internal quality, less absorption, high extinction ratio and high UV transmission. α-BBO is widely used in deep UV and high power laser systems as devices of Gran prisms, polarizing beam splitters, compensator and so on. ẞ-BBO is an excellent nonlinear crystal with combination of a number of unique features: wide transparen...