-
Good User Reputation for Crystals For Fhg - KTA Crystal – WISOPTIC
KTA (Potassium Titanyle Arsenate, KTiOAsO4 ) is a nonlinear optical crystal similar to KTP in which atom P is replaced by As. It has good non-linear optical and electro-optical properties, e.g. significantly reduced absorption in band range of 2.0-5.0 µm, broad angular and temperature bandwidth, low dielectric constants. Compared with KTP, the main advantages of KTA include: higher second-order nonlinear coefficient, longer IR cut-off wavelength, and less absorption at 3.5 µm. KTA also has lo... -
-
China Manufacturer for Crystals For Opo - KTP / GTR-KTP Crystal – WISOPTIC
KTP (KTiOPO4 ) is one of the most commonly used nonlinear optical materials. For example, it’s regularly used for frequency doubling of Nd:YAG lasers and other Nd-doped lasers, particularly at low or medium-power density. KTP is also widely used as OPO, EOM, optical wave-guide material, and in directional couplers. KTP exhibits a high optical quality, broad transparency range, wide acceptance angle, small walk-off angle, and type I and II non-critical phase-matching (NCPM) in a wide wavelengt... -
Professional Design Q-Switch Crystals - Nd:YVO4 Crystal – WISOPTIC
Nd:YVO4 (Neodymium-doped Yttrium Vanadate) is one of the best commercially available material for diode-pumped solid-state lasers, especially for lasers with low or middle power density. For example, Nd:YVO4 is a better choice than Nd:YAG for generating low-power beams in hand-held pointers or other compact lasers. In these applications, Nd:YOV4 has some advantages over Nd:YAG, e.g. high absorption of pumped laser irradiation and large stimulated emission cross section. Nd:YVO4 is a good choi... -
-
Hot sale Passive Q-Switch - DKDP POCKELS CELL – WISOPTIC
Because DKDP crystals are prone to deliquescent and have poor mechanical properties, DKDP Pockels cell with excellent performance have extremely high requirements for the selection of DKDP material, crystal processing quality and switch assembling technique. The high performance DKDP Pockels cell developed by WISOPTIC have been widely used in high-en cosmetic and medical lasers produced by some distinguished companies in China, Korea, Europe and USA. WISOPTIC has been granted of several paten... -
-
China OEM Yvo4 - LiNbO3 / PPLN Crystal – WISOPTIC
LiNbO3 (Lithium Niobate) crystal is a multifunctional material that integrates properties of piezoelectric, ferroelectric, pyroelectric, nonlinear, electro-optical, photoelastic, etc. LiNbO3 has good thermal stability and chemical stability. As one of the most thoroughly characterized nonlinear optical materials, LiNbO3 is suitable for a variety of frequency conversion applications. For example, it is widely used as frequency doublers for wavelength >1 μm and optical parametric oscillators... -
Factory Free sample Beamsplitters - Polarizing Beam Splitter – WISOPTIC
WISOPTIC Specifications – PBS* Material N-BK7（H-K9L), H-ZF3, fused quartz Diameters / Tolerance 0.5×0.5×0.5mm~50×50×50mm / ±0.2 mm Extinction Ratio Single band: >1000:1 Broad band: >300:1 Clear Aperture > 90% of central area Surface Quality < 40/20 [S/D] Flatness < λ/10 @ 632.8 nm Parallelism ≤ 10” Transmitted Light Deviation ＜±3 arcmin Reflected Light Deviation 90°±3 arcmin Transmission Ratio Tp>95%，Ts<1% Reflection Ratio Rs>99... -
Factory wholesale Linbo3 Q-Switch - BBO POCKELS CELL – WISOPTIC
BBO（Beta-Barium Borate, β-BaB2O4）based Pockels cells operate from approximately 0.2 – 1.65 µm and are not subject to tracking degradation. BBO exhibits low piezoelectric response, good thermal stability, and low absorption. Due to the low piezoelectric coupling coefficients of BBO, BBO Pockels cells function at repetition rates of hundreds of kilohertz. These Pockels cells work in regenerative amplifiers, high pulse repetition rate micro-machining lasers and high-average power lasers ... -
OEM/ODM Factory Glan-Laser Polarizer - THIN FILM POLARIZER – WISOPTIC
Thin film polarizers are made from composed materials which include a polarizing film, an inner protective film, a pressure-sensitive adhesive layer, and an outer protective film. Polarizer is used to change un-polarized beam into linear polarized beam. When the light passes through the polarizer, one of the orthogonal polarization components is strongly absorbed by the polarizer and the other component is weakly absorbed, thus natural light is converted into linearly polarized light. Polariz... -
