Products

Featured

  • China Cheap price Bonded Crystals - LBO Crystal – WISOPTIC
  • OEM China Brewster Plate - Polarizing Beam Splitter – WISOPTIC

    OEM China Brewster Plate - Polarizing Beam Splitter – WISOPTIC

      WISOPTIC Specifications – PBS* Material N-BK7(H-K9L), H-ZF3, fused quartz Diameters / Tolerance 0.5×0.5×0.5mm~50×50×50mm / ±0.2 mm Extinction Ratio Single band: >1000:1 Broad band: >300:1 Clear Aperture > 90% of central area Surface Quality < 40/20 [S/D] Flatness < λ/10 @ 632.8 nm  Parallelism ≤ 10” Transmitted Light Deviation <±3 arcmin Reflected Light Deviation 90°±3 arcmin Transmission Ratio Tp>95%,Ts<1% Reflection Ratio Rs>99...
  • 100% Original Dye Laser Handpiece - KTP POCKELS CELL – WISOPTIC

    100% Original Dye Laser Handpiece - KTP POCKELS CELL – WISOPTIC

    HGTR (high anti-grey track) KTP crystal developed by hydrothermal method overcomes the common phenomenon of electrochromism of the flux-grown KTP, thus has many advantages such as high electrical resistivity, low insertion loss, low half-wave voltage, high laser damage threshold, and wide transmission band. KTP Pockels cells made by HGTR-KTP crystal are mainly used in pulse lasers with narrow pulse width and high repetition frequency. Giving advantages of high extinction ratio, low half-wave ...
  • OEM/ODM China Α-Bab2o4 - KTA Crystal – WISOPTIC

    OEM/ODM China Α-Bab2o4 - KTA Crystal – WISOPTIC

    KTA (Potassium Titanyle Arsenate, KTiOAsO4 ) is a nonlinear optical crystal similar to KTP in which atom P is replaced by As. It has good non-linear optical and electro-optical properties, e.g. significantly reduced absorption in band range of 2.0-5.0 µm, broad angular and temperature bandwidth, low dielectric constants. Compared with KTP, the main advantages of KTA include: higher second-order nonlinear coefficient, longer IR cut-off wavelength, and less absorption at 3.5 µm. KTA also has lo...
  • Excellent quality Nd:Ylf Laser Components - DKDP POCKELS CELL – WISOPTIC

    Excellent quality Nd:Ylf Laser Components - DKDP POCKELS CELL – WISOPTIC

    Because DKDP crystals are prone to deliquescent and have poor mechanical properties, DKDP Pockels cell with excellent performance have extremely high requirements for the selection of DKDP material, crystal processing quality and switch assembling technique. The high performance DKDP Pockels cell developed by WISOPTIC have been widely used in high-en cosmetic and medical lasers produced by some distinguished companies in China, Korea, Europe and USA. WISOPTIC has been granted of several paten...
  • 2020 High quality Nlo Crystals - KTP / GTR-KTP Crystal – WISOPTIC

    2020 High quality Nlo Crystals - KTP / GTR-KTP Crystal – WISOPTIC

    KTP (KTiOPO4 ) is one of the most commonly used nonlinear optical materials. For example, it’s regularly used for frequency doubling of Nd:YAG lasers and other Nd-doped lasers, particularly at low or medium-power density. KTP is also widely used as OPO, EOM, optical wave-guide material, and in directional couplers. KTP exhibits a high optical quality, broad transparency range, wide acceptance angle, small walk-off angle, and type I and II non-critical phase-matching (NCPM) in a wide wavelengt...
  • factory Outlets for High Birefringence - Bonded Crystal – WISOPTIC

    factory Outlets for High Birefringence - Bonded Crystal – WISOPTIC

    Diffusion bonded crystal consists of two, three or more parts of crystals with different dopants or same dopant with different doping levels. This material is commonly made by bonding one laser crystal with one or two undoped crystals by precise optical contact and further processing under high temperature. This innovative design substantially reduces thermal lens effect of the laser crystals, thus make it possible fora compact laser to have enough power. Contact us for the best solution for ...
  • China OEM Half Waveplate - Polarizing Beam Splitter – WISOPTIC

    China OEM Half Waveplate - Polarizing Beam Splitter – WISOPTIC

      WISOPTIC Specifications – PBS* Material N-BK7(H-K9L), H-ZF3, fused quartz Diameters / Tolerance 0.5×0.5×0.5mm~50×50×50mm / ±0.2 mm Extinction Ratio Single band: >1000:1 Broad band: >300:1 Clear Aperture > 90% of central area Surface Quality < 40/20 [S/D] Flatness < λ/10 @ 632.8 nm  Parallelism ≤ 10” Transmitted Light Deviation <±3 arcmin Reflected Light Deviation 90°±3 arcmin Transmission Ratio Tp>95%,Ts<1% Reflection Ratio Rs>99...
  • Wholesale Nd:Yag - LBO Crystal – WISOPTIC
  • Good User Reputation for Crystals For Fhg - Nd:YVO4 Crystal – WISOPTIC

    Good User Reputation for Crystals For Fhg - Nd:YVO4 Crystal – WISOPTIC

    Nd:YVO4 (Neodymium-doped Yttrium Vanadate) is one of the best commercially available material for diode-pumped solid-state lasers, especially for lasers with low or middle power density. For example, Nd:YVO4 is a better choice than Nd:YAG for generating low-power beams in hand-held pointers or other compact lasers. In these applications, Nd:YOV4 has some advantages over Nd:YAG, e.g. high absorption of pumped laser irradiation and large stimulated emission cross section. Nd:YVO4 is a good choi...
  • High Quality Q-Switch - KTP POCKELS CELL – WISOPTIC

    High Quality Q-Switch - KTP POCKELS CELL – WISOPTIC

    HGTR (high anti-grey track) KTP crystal developed by hydrothermal method overcomes the common phenomenon of electrochromism of the flux-grown KTP, thus has many advantages such as high electrical resistivity, low insertion loss, low half-wave voltage, high laser damage threshold, and wide transmission band. KTP Pockels cells made by HGTR-KTP crystal are mainly used in pulse lasers with narrow pulse width and high repetition frequency. Giving advantages of high extinction ratio, low half-wave ...
  • High Quality Functional Crystals - LBO Crystal – WISOPTIC